Eng_Home
Eng_About
Eng_Awards
Eng_Predl
Eng_DekoSV10
Eng_DekoSV200
Eng_LS1.2
Eng_LS_MR
Eng_Deko_BA_BO
Eng_Deko_SiO
Eng_St_Moyki
Eng_SBOSV
Eng_KNS
KNS-N
Eng_PU_1
Eng_PU_2
Eng_Gallery
Eng_Card_Site
Eng_Contacts
Eng_Card_Site
Eng_Contacts
Eng_Home
Deko_SiO
Deko_SiO


Installation of dewatering, disinfection and drying of sludge "ДЕКО-СИО"

ТУ 4859-021-10442696-2007

Ecological certificate

Certificate of conformance

Explication

  

1 –  receiver tanks

6 – sludge unloading assembly

2 –  filtration sleeves

7 – stop valves       

3 – water receiving trays

8 – sludge dispensing system

4 – stop valves

9 – air heating and distribution system

5 – stop valves

10 – control valve

    


         Installation "ДЕКО-СИО" is operates as follows:

            Sludge feeds to a receiver tanks 1 and then unload by stuff from receiver tanks into filtration sleeves 2, where the sludge will remain 5(7) days. Feeding of sludge from receiver tanks 1 into filtration sleeves 2 is realized through the stop valves 4.

            As a result of long-term heat treatment of sludge (at a temperature 80 – 85оС) it is provided a destruction of pathogenic microflora and helminth eggs. At the same time, due to high moisture- resistance and vapor permeabilty of the material of filtration sleeves, during stay in a sleeve the humidity of sludge decreased up to 5-10%. Air supply into filtration sleeves 2 is realized through stop valves  5.

            Dried up and sterilized sludge is unloaded manually from filtration sleeves into a plastic flask, and after that is poured into a polyethylene bag (package) and tightly soldered. The bag is located on a temporary storing position.

            The unloading of sterilized sludge from the filtration sleeves 2 is realized through a binded mouth 6.

The mounted installation of dewatering, disinfecting and drying of sludge

"ДЕКО-СИО -3,2М/2".

Designation when order (example):

Installation of dewatering, disinfecting and drying of sludge ДЕКО-СИО-3,2М/2. ТУ 4859-021-10442696-2007.

Installation "ДЕКО-СИО-3,2М/2"  is intended for dewatering, disinfecting and drying of sludge.

 


Engineering performance of the installation

  

Engineering performance

Point of measure

"ДЕКО-СИО-3,2М/2"

1.

Dimension (not more),    L ´ B ´ H

m

3,938 х 2,870 х 4,900

2.

 Installed capacity

kW

8

3.

 Power consumption

kW

4

 


Manufacturing data of the installation

  

Indicators name

Point of measure

at the input

at the outlet

1.

Relative humidity

%

95-99

5-10

2.

Presence of helminth eggs

-

available

available

3.

Presence of pathogenic microflora

-

available

available

 


Principle diagram of installation "ДЕКО-СИО"

Теl./fax:  (4832) 56-59-38

(4832) 52-19-33

(4832) 57-76-04

Company "ДЕКО", Brjansk

Wastewater treatment 

and gas emissions

  

Sitemap  |  Contact details  |  Questionnaires  |   © 1992-2021 "ДЕКО"

- Eng

- Rus

dekoform@mail.ru

deko@dekoform.su